01Preparation

  • Park the car on a level surface and engage the parking brake.
  • Open the hood and locate the battery. Disconnect the negative terminal to prevent any electrical accidents.
  • Locate the ignition control module. It is typically mounted on the distributor or in close proximity to it. Refer to your car's manual for the exact location.

02Removal

  • Remove any covers or components that obstruct access to the ignition control module.
  • Disconnect the wiring harness connected to the ignition control module. Take note of the wire positions for easy reconnection later.
  • Remove the mounting screws or bolts that secure the ignition control module in place.
  • Gently pry the module away from its mounting location, being careful not to damage any surrounding components.

03Installation

  • Place the new ignition control module in the same position as the old one. Ensure that it is properly aligned with any mounting holes.
  • Secure the module in place by reinstalling the mounting screws or bolts.
  • Reconnect the wiring harness to the corresponding terminals on the new ignition control module.
  • Double-check all connections to ensure they are secure.
  • Replace any covers or components that were removed previously.
  • Reconnect the negative terminal of the battery.
  • Start the car and test the new ignition control module for proper functionality.

04Conclusion

  • Changing a car ignition control module is a relatively straightforward process that can greatly improve the performance of your vehicle.
  • By following these steps and taking necessary safety precautions, you can successfully replace the ignition control module and restore proper engine function.
  • If you are unsure or uncomfortable with performing the replacement yourself, it is recommended to consult a professional mechanic.

Conclusion

Follow these steps to change your car ignition control module and enjoy improved engine performance. Remember to prioritize safety and seek professional assistance if needed.

MethodsDetails
PreparationPark the car, disconnect the battery, and locate the ignition control module.
RemovalRemove obstruction, disconnect wiring harness, remove mounting screws, and gently pry the module.
InstallationPlace the new module, secure it with screws, reconnect the wiring harness, and test for functionality.
ConclusionChanging the ignition control module can enhance vehicle performance. Prioritize safety and consult a professional if needed.
car ignition control module
ignition system
engine performance
no-start situations