How to change a car oil filter housing?

Olivia Davis

1 minutes

Changing the oil filter housing in a car is a relatively simple task that can be done by most car owners. This article will guide you through the steps to successfully change a car oil filter housing.

Table of Contents

Step 1: Gather the necessary tools and materials
Step 2: Prepare the car
Step 3: Remove the old oil filter housing
Step 4: Install the new oil filter housing
Step 5: Refill with engine oil

01Step 1: Gather the necessary tools and materials

To change a car oil filter housing, you will need the following tools and materials:
- New oil filter housing
- Wrench
- Screwdriver
- Clean rags
- Safety gloves
- Oil filter wrench
- Drain pan
- New oil filter
- New gasket
- Engine oil

02Step 2: Prepare the car

Before starting the oil filter housing replacement process, make sure to:
- Park the car on a level surface
- Engage the parking brake
- Allow the engine to cool down
- Open the car hood and locate the oil filter housing

03Step 3: Remove the old oil filter housing

To remove the old oil filter housing, follow these steps:
Use the wrench to loosen the oil filter housing cap
Unscrew the cap and carefully remove it
Take out the old oil filter and discard it
Clean the area around the oil filter housing to remove any debris or dirt

04Step 4: Install the new oil filter housing

Now it's time to install the new oil filter housing:
Apply a thin coat of clean engine oil on the new gasket
Place the new gasket onto the oil filter housing cap
Insert the new oil filter into the housing
Screw the oil filter housing cap back into place
Use the wrench to securely tighten the cap
Wipe off any excess oil or grease from the housing

05Step 5: Refill with engine oil

After installing the new oil filter housing, follow these steps to refill the engine oil:
Locate the oil filler cap and remove it
Pour the recommended amount of engine oil into the filler opening
Check the oil level using the dipstick
Add more oil if necessary, but do not exceed the maximum level
Close the oil filler cap tightly

Conclusion

Changing a car oil filter housing is an essential part of regular car maintenance. By following these steps, you can ensure that your car's engine is protected and running smoothly.

Methods	Details
Step 1	Gather the necessary tools and materials
Step 2	Prepare the car
Step 3	Remove the old oil filter housing
Step 4	Install the new oil filter housing
Step 5	Refill with engine oil

car maintenance

oil filter housing

car care