01Find a safe location

  • When you realize that you have a flat tire, the first step is to find a safe location to park your car. Look for a flat and stable surface away from traffic.
  • If you're on a busy highway, try to find an exit or a wide shoulder where you can safely pull over. Avoid stopping on a curve or a hill.
  • Turn on your hazard lights to alert other drivers that your vehicle is stationary.

02Gather the necessary tools

  • Before you begin changing the tire, gather the following tools: a spare tire, a jack, a lug wrench, and a wheel chock.
  • Make sure these tools are in good condition and easily accessible in your car's trunk or storage compartment.
  • It's also a good idea to keep a flashlight and some gloves handy in case you need them.

03Loosen the lug nuts

  • Use the lug wrench to loosen the lug nuts on the flat tire. Turn them counterclockwise, but don't remove them completely.
  • Loosening the lug nuts before lifting the car will make it easier to remove them once the car is raised.

04Lift the car with a jack

  • Place the jack in the designated lifting point beneath the car. Refer to your car's manual for the correct location.
  • Pump the jack handle up and down to lift the car off the ground. Make sure the car is stable and secure before continuing.
  • Note: Never put any part of your body under the car while it is supported only by the jack. Use additional support such as jack stands for safety.

05Remove the lug nuts and the flat tire

  • Now that the car is lifted, you can safely remove the lug nuts and the flat tire.
  • Turn the lug nuts counterclockwise until they are completely loosened and easy to remove.
  • Remove the flat tire and set it aside.

06Install the spare tire

  • Take the spare tire and align it with the wheel studs. Push it onto the studs until it can't move any further.
  • Screw on the lug nuts by hand, turning them clockwise until they are snug.
  • Using the lug wrench, tighten the lug nuts as much as possible in a star pattern.

07Lower the car and tighten the lug nuts

  • Slowly lower the car by turning the jack handle counterclockwise.
  • Once the car is on the ground, use the lug wrench to tighten the lug nuts in a star pattern.
  • Make sure they are tight enough to secure the spare tire.

Conclusion

Changing a car tire is a straightforward process, but it requires caution and careful execution. By following these step-by-step instructions, you can safely change a flat tire and get back on the road in no time.

MethodsDetails
Step 1Find a safe location to park your car.
Step 2Gather the necessary tools: spare tire, jack, lug wrench.
Step 3Loosen the lug nuts on the flat tire.
Step 4Lift the car with a jack.
Step 5Remove the lug nuts and the flat tire.
Step 6Install the spare tire.
Step 7Lower the car and tighten the lug nuts.
car tire
tire changing
car maintenance