01Step 1: Gather the necessary tools

  • Before you begin, make sure you have the following tools:
  • - Wrench set
  • - Screwdriver set
  • - Socket set
  • - Pliers
  • - Clean cloth
  • - Penetrating oil

02Step 2: Remove the old kickstart lever

  • To remove the old kickstart lever, follow these steps:
  • Locate the kickstart lever on your motorcycle.
  • Use a wrench or socket to loosen and remove the bolt that secures the lever to the kickstart shaft.
  • Carefully slide the old lever off the shaft.

03Step 3: Prepare the new kickstart lever

  • Before installing the new kickstart lever, you need to prepare it:
  • Clean the kickstart shaft with a clean cloth to remove any dirt or debris.
  • Apply a small amount of penetrating oil to the shaft to lubricate it.
  • Inspect the new kickstart lever for any damage or defects.

04Step 4: Install the new kickstart lever

  • To install the new kickstart lever, follow these steps:
  • Slide the new lever onto the kickstart shaft.
  • Align the lever with the shaft and make sure it is securely in place.
  • Use a wrench or socket to tighten the bolt that secures the lever to the shaft.
  • Test the kickstart lever to ensure it moves smoothly and engages the engine.

05Step 5: Clean up and final checks

  • After installing the new kickstart lever, take the following steps:
  • Clean any excess oil or debris from the lever and shaft.
  • Double-check that the lever is securely attached and functioning properly.
  • Test the kickstart lever again to ensure smooth operation.
  • Dispose of any packaging or old parts properly.

Conclusion

By following these steps, you can successfully change the kickstart lever on your motorcycle. Remember to take your time, use caution, and refer to your motorcycle's manual if needed.

MethodsDetails
Step 1Gather the necessary tools
Step 2Remove the old kickstart lever
Step 3Prepare the new kickstart lever
Step 4Install the new kickstart lever
Step 5Clean up and final checks
motorcycle
kickstart
lever
change