01Using the Command Prompt (Windows)

  • Step 1: Open the Command Prompt by pressing Windows + R and then typing 'cmd' in the 'Run' dialog box.
  • Step 2: In the Command Prompt window, type 'ipconfig' and press Enter. This will display the IP addresses of all network adapters on your computer.
  • Step 3: Look for the IP address under the 'IPv4 Address' or 'IPv6 Address' section. The IP address will be a series of numbers separated by dots or colons.

02Using the Terminal (Mac)

  • Step 1: Open the Terminal by navigating to Applications > Utilities > Terminal.
  • Step 2: In the Terminal window, type 'ifconfig' and press Enter. This will display the IP addresses of all network interfaces on your Mac.
  • Step 3: Look for the IP address under the 'inet' or 'inet6' section. The IP address will be a series of numbers separated by dots or colons.

03Checking the Router's DHCP Client List

  • Step 1: Open your web browser and enter the IP address of your router in the address bar. The default IP address is usually '192.168.1.1' or '192.168.0.1'. You can find this information in the router's manual or by checking the manufacturer's website.
  • Step 2: Enter the router's username and password to log in. Again, this information can usually be found in the router's manual or by checking the manufacturer's website.
  • Step 3: Once logged in, navigate to the DHCP Client List or a similar section. This list will display the IP addresses of all devices connected to the router.
  • Step 4: Look for the device you are interested in and note its IP address.

04Using a Network Scanner

  • Step 1: Download and install a network scanner tool. There are various options available, such as Angry IP Scanner, Advanced IP Scanner, and Nmap.
  • Step 2: Open the network scanner tool and select the scan range, which is usually the IP address range of your local network. This information can be found in your router's settings or by using the 'ipconfig' command in the Command Prompt or Terminal.
  • Step 3: Start the scan and wait for the tool to find all the active devices on your network.
  • Step 4: Look for the device you want to find and note its IP address.

Conclusion

Finding the IP address of a device on the network is essential for network troubleshooting and device configuration. By using methods such as the Command Prompt/Terminal, checking the router's DHCP client list, or using a network scanner, you can easily locate the IP address of any connected device. Remember to refer to the device's manual or the manufacturer's website for specific instructions. With this information, you can ensure smooth communication and proper network setup.

MethodsDetails
Using Command PromptOpen Command Prompt, type 'ipconfig', find IP address under 'IPv4 Address' or 'IPv6 Address' section.
Using TerminalOpen Terminal, type 'ifconfig', find IP address under 'inet' or 'inet6' section.
Checking Router's DHCP Client ListAccess router settings, find DHCP Client List or similar section, locate device and note IP address.
Using a Network ScannerDownload network scanner tool, select scan range, start scan, locate device and note IP address.
network troubleshooting
IP address
device configuration