01Gather the necessary tools

  • Before you begin fixing a clogged sink, gather the necessary tools to ensure a smooth and efficient process.
  • The tools you'll need include a plunger, a pair of rubber gloves, a bucket, a pipe wrench, a plumber's snake, and a wire hanger.
  • Having these tools ready will help you tackle the clog effectively.

02Remove any standing water

  • If there is standing water in the sink, you'll need to remove it before attempting to fix the clog.
  • Use a bucket or a cup to scoop out the water and dispose of it.
  • This will prevent any additional mess and make it easier to access the clog.

03Unclog the sink with a plunger

  • The first method to try is using a plunger to unclog the sink.
  • Ensure that there is enough water in the sink to cover the rubber of the plunger.
  • Place the plunger over the drain and firmly push down and pull up to create suction.
  • Repeat this motion several times to dislodge the clog.
  • Once the water starts draining, test the sink to ensure it is fully unclogged.

04Clear the clog with a plumber's snake

  • If the plunger doesn't work, you can try using a plumber's snake to clear the clog.
  • Insert the snake into the drain and rotate it clockwise while pushing it forward.
  • Continue until you feel resistance, then rotate the snake counterclockwise to break up the clog.
  • Pull out the snake and run hot water in the sink to flush away any remaining debris.
  • Test the sink to ensure that the clog has been successfully cleared.

05Check the P-trap

  • If the previous methods don't work, the clog may be located in the P-trap.
  • Place a bucket underneath the P-trap to catch any water that may spill out.
  • Use a pipe wrench to loosen the fittings on both ends of the P-trap.
  • Carefully remove the trap and clean out any debris or clogs.
  • Reassemble the P-trap and run water to check if the clog has been resolved.

Conclusion

By following these step-by-step instructions, you should be able to fix a clogged sink on your own. Remember to always take precautionary measures and wear protective gloves when working with plumbing.

MethodsDetails
Step 1Gather the necessary tools
Step 2Remove any standing water
Step 3Unclog the sink with a plunger
Step 4Clear the clog with a plumber's snake
Step 5Check the P-trap
clogged sink
sink repair
plumbing