01Gather the necessary tools

  • Before you start fixing your dripping shower head, make sure you have the following tools handy:
  • - Adjustable wrench
  • - Pipe tape
  • - Replacement parts (such as washers or cartridges)

02Turn off the water supply

  • To avoid any accidents or water damage, locate the water shut-off valve for your shower.
  • Turn off the water supply by turning the valve clockwise until it is fully closed.

03Remove the shower head

  • Using an adjustable wrench, carefully loosen and remove the shower head from the shower arm.
  • Wrap a cloth around the shower arm to protect it from scratches.

04Inspect the shower head and parts

  • Examine the shower head and its parts for any signs of damage or wear.
  • Check the washers, O-rings, or cartridges for cracks, tears, or mineral deposits.

05Replace faulty parts

  • If you find any faulty parts during your inspection, replace them with new ones.
  • Make sure to use the correct replacement parts for your shower head model.

06Apply pipe tape

  • Wrap pipe tape around the threads of the shower arm to create a tight seal.
  • This will help prevent any leaks when reinstalling the shower head.

07Reinstall the shower head

  • Carefully attach the shower head back onto the shower arm.
  • Use the adjustable wrench to tighten it securely, but be careful not to overtighten.

08Turn on the water supply

  • Once the shower head is securely in place, turn on the water supply by reopening the shut-off valve.
  • Check for any leaks and make sure the water flow is normal.

Conclusion

By following these steps, you should be able to fix a dripping shower head on your own. Remember to always turn off the water supply before starting any repairs and use the appropriate replacement parts for your shower head model. Fixing a dripping shower head not only saves you from the annoyance of the constant drip, but also helps conserve water.

MethodsDetails
Step 1Gather the necessary tools
Step 2Turn off the water supply
Step 3Remove the shower head
Step 4Inspect the shower head and parts
Step 5Replace faulty parts
Step 6Apply pipe tape
Step 7Reinstall the shower head
Step 8Turn on the water supply
dripping shower head
fix
step-by-step guide
water conservation