How to fix a leaky faucet?

Caleb Roberts

1 minutes

A leaky faucet can be a frustrating and wasteful problem. Luckily, fixing it is often a simple task that you can do yourself. This article will guide you through the steps of fixing a leaky faucet and help you save water and money.

Table of Contents

Gather the necessary tools
Turn off the water supply
Dismantle the faucet
Inspect and replace faulty parts
Reassemble the faucet
Turn on the water supply

01Gather the necessary tools

Before you begin fixing your leaky faucet, make sure you have the following tools:
- Adjustable wrench
- Screwdriver
- Replacement parts (such as washers or cartridges)
- Plumber's tape

02Turn off the water supply

Before you start any repairs, it is important to turn off the water supply to the faucet. Look for the shut-off valves under the sink and turn them clockwise to shut off the water.

03Dismantle the faucet

Use your wrench or screwdriver to remove the handle of the faucet. This will give you access to the inner parts that may be causing the leak. Take note of the order in which you remove the parts so you can easily put them back together later.

04Inspect and replace faulty parts

Inspect the parts for any signs of damage or wear. Common causes of a leaky faucet include worn-out washers and faulty cartridges. If you find any damaged parts, replace them with new ones. Apply plumber's tape to ensure a proper seal.

05Reassemble the faucet

Carefully put all the parts back together in the reverse order of how you took them apart. Make sure everything is properly aligned and tightened. Use your wrench or screwdriver to secure the handle in place.

06Turn on the water supply

Once you have reassembled the faucet, turn on the water supply by reopening the shut-off valves. Check for any leaks and ensure that the faucet is functioning properly. If there are still leaks, you may need to repeat the steps or seek professional help.

Conclusion

Fixing a leaky faucet is a simple and rewarding DIY task. By following these steps, you can save water, prevent further damage, and enjoy a leak-free faucet once again.

Methods	Details
Gather Tools	Collect the necessary tools for the job.
Turn off Water Supply	Locate and shut off the water supply to the faucet.
Dismantle the Faucet	Remove the handle to access the inner parts.
Inspect and Replace Faulty Parts	Check for damage and replace any faulty parts.
Reassemble the Faucet	Put all the parts back together and secure them.
Turn on the Water Supply	Open the shut-off valves to restore the water supply.

faucet

leaky faucet

fixing

water conservation