01Tools Required

  • Small Phillips screwdriver
  • Watch hand remover tool
  • Blu-Tack or adhesive putty
  • Tweezers
  • Soft cloth or watchmaker's paper

02Step 1: Remove the Watch Hands

  • Use the small Phillips screwdriver to remove the screws on the watch face.
  • Once the screws are removed, carefully lift the watch hands using the watch hand remover tool.
  • Place the removed watch hands on a clean, soft cloth or watchmaker's paper to prevent scratches.

03Step 2: Tighten the Hour Hand

  • Inspect the hour hand and the minute hand to identify the connection point.
  • Using the tweezers, gently lift the hour hand slightly away from the watch face.
  • Apply a small amount of Blu-Tack or adhesive putty to the connection point of the hour hand.
  • Carefully press the hour hand back in place, ensuring it is aligned with the minute hand.
  • Hold the hour hand in place for a few seconds to allow the adhesive to set.

04Step 3: Reattach the Watch Hands

  • Once the hour hand is securely in place, reattach the minute hand and any other watch hands that were removed.
  • Use the watch hand remover tool to press the watch hands firmly onto their respective stems.
  • Make sure the watch hands are properly aligned and move smoothly.

05Step 4: Test the Watch

  • Set the correct time on your watch.
  • Gently move the watch hands to ensure they are functioning properly and not slipping or coming loose.
  • If everything is working as expected, you have successfully fixed your watch with a loose hour hand.

Conclusion

Fixing a watch that has a loose hour hand is a relatively simple process that can save you time and money. By following the steps outlined in this article, you can easily tighten the hour hand and restore the functionality of your watch. Remember to use caution and be patient while working with delicate watch components. If you are unsure or uncomfortable performing the repair yourself, it is always best to seek professional help.

MethodsDetails
Step 1Gather the necessary tools for the repair, including a Phillips screwdriver, watch hand remover tool, Blu-Tack or adhesive putty, tweezers, and a soft cloth or watchmaker's paper.
Step 2Remove the watch hands carefully using the screwdriver and watch hand remover tool. Place them on a soft cloth to avoid scratches.
Step 3Inspect and tighten the hour hand by lifting it slightly and applying adhesive putty. Press it back in place and hold for a few seconds to set.
Step 4Reattach the watch hands onto their respective stems, ensuring they are properly aligned and move smoothly.
Step 5Test the watch by setting the correct time and checking if the watch hands function properly without any slippage.
watch repair
loose hour hand
fixing watches