01Gather the necessary tools

  • Before starting the repair, make sure you have the following tools handy:
  • - Precision screwdriver set
  • - Tweezers
  • - Watchmaker's loupe or magnifying glass
  • - Soft cloth
  • Having these tools will make the repair process much easier.

02Remove the watch's back cover

  • To access the mechanism of the watch, you need to remove the back cover. Here's how to do it:
  • - Carefully inspect the back cover for any screws or notches.
  • - If there are screws, use the appropriate size of the precision screwdriver to remove them.
  • - If there are notches, use a case opener tool or a flathead screwdriver to carefully pry open the cover.
  • - Once the back cover is removed, set it aside in a safe place.

03Locate the minute hand

  • With the back cover removed, you will now have access to the internal workings of the watch. Locate the minute hand, which is usually the longer hand out of the two (hour and minute).
  • - Use a magnifying glass or watchmaker's loupe to get a closer look if needed.

04Tighten the minute hand

  • Now that you've located the loose minute hand, it's time to tighten it. Follow these steps:
  • - Gently hold the minute hand in place with one hand to prevent it from moving.
  • - With your other hand, use a pair of tweezers to tighten the small screw located at the center of the minute hand.
  • - Turn the screw clockwise until it is securely tightened. Be careful not to overtighten, as it may damage the hand or mechanism.
  • - Test the minute hand by gently moving it to see if it's now secure and aligned properly.
  • - If the hand still feels loose, repeat the tightening process until it is fixed.

05Reassemble the watch

  • Once the minute hand is securely tightened, it's time to reassemble the watch. Follow these steps:
  • - Carefully place the back cover back onto the watch, aligning it properly.
  • - If there were screws, use the precision screwdriver to tighten them back into place.
  • - If there were notches, press the cover firmly until it snaps back into place.
  • - Give the watch a gentle shake to ensure everything is secure and properly aligned.
  • Congratulations! You have successfully fixed your watch with a loose minute hand.

Conclusion

Fixing a watch with a loose minute hand doesn't have to be a daunting task. By following the steps outlined in this article, you can easily tighten the minute hand and have your watch working perfectly again. Remember to handle the delicate watch parts with care and take your time during the repair process. Enjoy your properly functioning watch!

MethodsDetails
Step 1Gather the necessary tools
Step 2Remove the watch's back cover
Step 3Locate the minute hand
Step 4Tighten the minute hand
Step 5Reassemble the watch
watch repair
minute hand
fixing watches