01What are Motorcycle Frame Sliders?

  • Motorcycle frame sliders are protective components that attach to the frame of your bike.
  • They are usually made of durable materials like aluminum, plastic, or carbon fiber.
  • The main purpose of frame sliders is to prevent or minimize damage to the motorcycle's frame and other critical components in the event of a fall or crash.
  • Frame sliders act as a buffer, absorbing the impact and distributing the force over a larger area.
  • They are designed to slide smoothly on the ground, reducing the chance of your motorcycle flipping or tumbling.

02Tools and Materials Needed

  • Before you begin the installation process, make sure you have the following tools and materials:
  • - Motorcycle frame sliders kit (includes sliders, bolts, and other necessary hardware)
  • - Socket set
  • - Wrench set
  • - Allen wrench set
  • - Torque wrench
  • - Thread-locking compound (optional)
  • - Clean cloth
  • - Loctite or similar thread locker (optional)

03Step-by-Step Installation Process

  • Preparation:
  • - Start by parking your motorcycle on a flat, stable surface.
  • - Turn off the engine and remove the key from the ignition.
  • - Ensure that the motorcycle is secure and won't tip over during the installation process.
  • - Wear protective gloves and eyewear to prevent injuries.
  • Remove Fairings (if required):
  • - Depending on your motorcycle model, you may need to remove the fairings to access the frame attachment points.
  • - Refer to your motorcycle's service manual or the instructions provided with the frame sliders kit.
  • Locate Attachment Points:
  • - Identify the frame attachment points where the sliders will be installed.
  • - These points are usually located on the engine mounts or the frame itself.
  • - Clean the attachment points using a clean cloth to remove any dirt or debris.
  • Install Frame Sliders:
  • - Take one of the frame sliders and align it with the attachment point.
  • - Insert the bolt provided with the kit through the slider and into the attachment point.
  • - Tighten the bolt using the appropriate tools.
  • - Repeat the same process for the other side of the motorcycle.
  • - Make sure the sliders are securely attached to the frame.
  • - Use a torque wrench to tighten the bolts to the manufacturer's recommended torque specifications.
  • - Apply thread-locking compound or Loctite to the bolts (optional) to prevent them from loosening over time.
  • Reinstall Fairings (if applicable):
  • - If you had to remove the fairings, carefully reinstall them following the instructions provided.
  • - Double-check that all bolts and fasteners are properly tightened.
  • Final Inspection:
  • - Once the frame sliders are installed and the fairings are back in place, inspect the installation for any loose components or misalignment.
  • - Give the sliders a gentle tug to ensure they are securely attached.
  • - Test the movement of the handlebars, wheels, and other moving parts to ensure nothing is obstructed.
  • Test Ride:
  • - Take your motorcycle for a short test ride in a safe and controlled environment.
  • - Pay attention to any unusual vibrations or handling issues.
  • - If everything feels normal, congratulations! You have successfully installed frame sliders on your motorcycle.

Conclusion

Installing motorcycle frame sliders not only provides an added layer of protection to your bike but also gives you peace of mind knowing that your motorcycle's frame is safeguarded in case of an accident or fall. By following the step-by-step installation process outlined in this article, you can ensure a secure and reliable installation of frame sliders on your motorcycle.

MethodsDetails
Step 1Park the motorcycle on a flat surface and ensure it is secure.
Step 2Remove the fairings (if necessary) to access the attachment points.
Step 3Locate the frame attachment points and clean them.
Step 4Align and install the frame sliders on both sides of the motorcycle.
Step 5Reinstall the fairings (if applicable) and check for proper tightening.
Step 6Inspect the installation for any loose components or misalignment.
Step 7Take a test ride to ensure everything is functioning correctly.
motorcycle frame sliders
installing frame sliders