01What You'll Need

  • Motorcycle tank pad
  • Rubbing alcohol
  • Clean cloth
  • Masking tape
  • Scissors

02Preparation

  • Clean the surface of your motorcycle's fuel tank with rubbing alcohol and a clean cloth.
  • Ensure the tank is dry before proceeding to the next step.

03Measuring and Placement

  • Use masking tape to mark the desired placement of the tank pad on your motorcycle's fuel tank.
  • Make sure the tape is positioned symmetrically and aligns with the contours of the tank.
  • Take measurements to ensure accurate placement.

04Applying the Tank Pad

  • Peel off the backing from the tank pad to expose the adhesive side.
  • Carefully align the pad with the marked placement on your motorcycle's fuel tank, pressing it firmly to ensure proper adhesion.
  • Smooth out any air bubbles or wrinkles by applying even pressure with your hands.
  • Allow the adhesive to set and bond according to the manufacturer's instructions.

05Trimming (If Necessary)

  • If the tank pad extends beyond the edges of your motorcycle's fuel tank, use scissors to trim the excess material.
  • Take your time and make precise cuts to achieve a clean and professional-looking installation.

Conclusion

By following these simple steps, you can easily install a tank pad on your motorcycle and protect your fuel tank from potential damage. Remember to refer to the manufacturer's instructions for specific guidance on adhesive bonding and curing times. Enjoy the added protection and grip that a tank pad provides during your rides.

MethodsDetails
Step 1Gather the necessary supplies: motorcycle tank pad, rubbing alcohol, clean cloth, masking tape, and scissors.
Step 2Clean the surface of the fuel tank with rubbing alcohol and a clean cloth, ensuring it is dry before proceeding.
Step 3Use masking tape to mark the desired placement of the tank pad on the fuel tank, ensuring symmetry and proper alignment.
Step 4Peel off the backing from the tank pad and carefully align it with the marked placement on the fuel tank, pressing firmly.
Step 5Smooth out any air bubbles or wrinkles, and allow the adhesive to set according to the manufacturer's instructions.
Step 6Trim any excess material if necessary, ensuring a clean and professional-looking installation.
motorcycle tank pad
installing tank pad
motorcycle accessories