01Step 1: Prepare for the Replacement

  • Park your car on a flat surface and engage the parking brake.
  • Disconnect the negative terminal of the car's battery to prevent any electrical accidents.
  • Locate the ignition control module. It is usually mounted near the distributor.
  • Take note of the module's connections and wiring for reference during the replacement.

02Step 2: Remove the Old Ignition Control Module

  • Carefully disconnect the electrical connectors attached to the module.
  • Remove any mounting screws or bolts securing the module to the engine.
  • Gently lift the module away from the distributor, taking care not to damage the wiring or other components.

03Step 3: Install the New Ignition Control Module

  • Position the new ignition control module in place on the distributor.
  • Reattach the electrical connectors to their respective terminals on the module.
  • Secure the module to the engine using the mounting screws or bolts.
  • Double-check all connections to ensure they are tight and secure.

04Step 4: Test and Verify

  • Reconnect the negative terminal of the car's battery.
  • Start the engine and observe its performance.
  • Check for any error codes or warning lights on the dashboard.
  • Take the car for a test drive to ensure proper functioning of the ignition system.

Conclusion

By following these steps, you can successfully replace your car's ignition control module. Proper installation and testing are essential to ensure the smooth operation of your vehicle. If you encounter any difficulties or are unsure about any step, it is recommended to consult a professional mechanic for assistance.

MethodsDetails
Step 1Prepare for the replacement by parking the car, disconnecting the battery, and locating the module.
Step 2Remove the old ignition control module by disconnecting electrical connectors and removing mounting screws.
Step 3Install the new ignition control module by attaching connectors and securing it to the engine.
Step 4Test and verify the installation by reconnecting the battery, starting the engine, and checking for proper functioning.
car
ignition control module
replace
ignition system
spark plugs