1. Gather the necessary information
Before you start programming the keyless entry for your Toyota RAV4, make sure you have the necessary information. You will need the Vehicle Identification Number (VIN), which can be found on the driver's side dashboard or the driver's side door jamb. You will also need the original remote control for the keyless entry system. Having these items ready will ensure a smooth and successful programming process.
2. Enter programming mode
To enter programming mode for the keyless entry system, follow these steps: 1. Close all doors and ensure they are unlocked. 2. Insert the key into the ignition and turn it to the "ON" position. 3. Press and hold the "Unlock" button on the original remote control. 4. While holding the "Unlock" button, press and release the "Lock" button three times. 5. Release the "Unlock" button. The doors should automatically lock and unlock. 6. You have now entered programming mode.
3. Program the new remote control
To program a new remote control for the keyless entry system, follow these steps: 1. Press and hold the "Lock" and "Unlock" buttons on the new remote control at the same time. 2. After approximately 1.5 seconds, release both buttons. The doors should automatically lock and unlock, indicating that the programming was successful. 3. Repeat step 2 for any additional remote controls you want to program. 4. Once you have finished programming all the remote controls, turn the ignition off to exit programming mode.
4. Test the keyless entry system
After programming the new remote control, it is important to test the keyless entry system to ensure everything is working correctly. Stand a few feet away from the vehicle and press the "Lock" and "Unlock" buttons on the new remote control. The doors should lock and unlock in response to the button presses. If the doors do not respond or there are any issues, double-check the programming steps and repeat the process if necessary.