1. Planning and Preparation
Before starting the installation process, it is essential to plan and prepare for the task. Here are the steps involved in this stage: 1. Determine the suitable location for the indoor and outdoor units. 2. Measure the dimensions of the selected locations to ensure compatibility with the AC unit. 3. Check the electrical circuit and ensure it can handle the power requirements of the AC unit. 4. Gather all the necessary tools and equipment for the installation process. 5. Read the manufacturer's installation manual to understand the specific requirements for your AC unit model.
2. Installation of Indoor Unit
The installation of the indoor unit involves the following steps: 1. Install the mounting plate on the wall at the selected location. 2. Drill holes in the wall for connecting pipes, wires, and drainage. 3. Mount the indoor unit on the mounting plate securely. 4. Connect the refrigerant pipe, condensate drain pipe, and electrical wires following the manufacturer's instructions. 5. Insulate the refrigerant pipe to prevent energy loss and condensation.
3. Installation of Outdoor Unit
The installation of the outdoor unit involves the following steps: 1. Select a suitable location for the outdoor unit that allows proper airflow and minimizes noise. 2. Install a concrete pad or wall bracket to provide a stable base for the outdoor unit. 3. Mount the outdoor unit on the pad or wall bracket securely. 4. Connect the refrigerant pipe and electrical wires from the indoor unit to the outdoor unit. 5. Verify the proper connections and tighten them to ensure a leak-free installation.
4. Testing and Commissioning
After completing the installation, it is crucial to test and commission the split type AC system. Follow these steps: 1. Turn on the power supply and check if the indoor and outdoor units are receiving power. 2. Test the remote control and ensure it is functioning correctly. 3. Set the desired temperature and mode to check if the AC unit is cooling or heating properly. 4. Check for any abnormal noises, vibrations, or leaks during the testing process. 5. Adjust the refrigerant charge and airflow as per the manufacturer's guidelines to achieve optimal performance.